Li-poly SMART CHARGER 1200 MANUAL  
                      Li-Poly
          SMART CHARGER 1200 MANUAL

SMART CHARGER 1200 is intended for Li-Poly battery only.
Please read this manual carefully and use correct way.

1. Features of the "SMART CHARGER 1200"
 * Chargeable cell :  1 cell to 4 cell.
 * In Put Voltage : 10V ~ 13.5V
 * Selectable out put voltage : 4.2V(1Cell), 8.4V(2Cell), 12.6V(3Cell), 16.8V(4Cell) 
 * Selectable out put current : 100mA, 250mA, 600mA, 1200mA.
 * Reverse polarity protection circuit included.
 * LED display :
   Red LED On : Charging Mode
    Green LED On : Trickle Charging Mode.
 * Dimension : 105mm x 62mm x 15mm

2. OUT PUT CURRENT SELECT
SWITCH         OUT PUT CURRENT 
          100mA  250mA 600mA  1200mA 
S/W  1      ON    OFF   ON     OFF 
S/W  2      ON    ON    OFF    OFF 


3. OUT PUT VOLTAGE SELECT
SWITCH       OUT PUT VOLTAGE 
         4.2   8.4    12.6  16.8 
S/W  3    ON    OFF    ON    OFF 
S/W  4    ON    ON     OFF   OFF 
CELL     1CELL 2CELL  3CELL 4CELL 

4. Cautionsdsasdas
 1)SMART CHARGER 1200 is intended for Li-Poly battery only.
    (Please do not charge NiCde, NiMH or PB BATTERY.)
 2) Charging Rate 
    1C -  Max
 3) Please do not use this charger in small case.
    Also, please stay away from burning material.
 4) Please do not disassemble. 
 5) Please double check the position of S/W 1.2.3.4 to proffer charging and safety.
    * When you charge 2 cell battery to 3 cell mode, it will be destroyed
      and never recovered.
    * If you position current S/W over 1C, this battery will be over heated 
       and life time will be extremely short.
 6) Please never exceed in put voltage over 13.5V.

5. LED Display
 1) Reverse Polarity of in put source : LED do not "ON".
 2) Reverse Polarity of out put source : LED do not "ON".
 3) Short Circuit of out put tab : Red LED "Flashing"
    (The result may destroy battery.)
 4) Wrong select of S/W 3  or  SW 4 : Red LED "Flashing".
    (CAUTION) - In case of you positioned S/W3 & S/W4 over your cell quantity                
                battery will be destroyed.(LED do not ON)
 5) Charging Mode : Red LED "ON".
 6) Completed Charging : Green LED "ON".
    (At this moment, this battery is over 99% charged.
      And it will be switched "Trickle Mode",  you do not need to disconnect this.)